miniMOT V2
- Factory-sealed UHV system
- Rb or Cs source options
- Touchscreen system control
- miniMOT Coils included
Without alkali load
<1 x 10⁻⁸ Torr vacuum
miniMOT V2 combines a factory-sealed ultrahigh-vacuum system, integrated vacuum and alkali-source controls, coil drive electronics, and a touchscreen interface. It ships under vacuum, ready to become the core of a research, teaching, or prototype-development setup.
The miniMOT Coils are included with miniMOT V2. Add the miniMOT Package for a pre-aligned optical path on a compact breadboard.
Choose a rubidium or cesium source.
Select thin-walled, square, or imaging-cell options, with available AR coatings.
Create a 3D MOT with the included coil pair and your laser-delivery setup.
Product Options
See what comes standard, what expands the setup, and how each component supports your path to a working 3D MOT.
Without alkali load
<1 x 10⁻⁸ Torr vacuum
gradient
0-13.5 G/(A-cm)
Benefits
Start with the vacuum, control, magnetic-field, and optics infrastructure already brought together for cold atom work.
With a suitable FC/APC cooling laser input and the miniMOT Package, produce a live MOT within hours and focus sooner on the experiment itself.
Use the touchscreen to manage the ion pump, alkali dispenser current, coil current, and coil polarity from one compact system.
Configure the system for rubidium or cesium, with available thin-walled, square, and imaging glass-cell options.
Bring lasers, optics, spectroscopy, magnetic confinement, and cold atom physics into teaching laboratories and workforce training.
Case Study
Students built a MOT and explored cold atom physics.
We did all of this in under 3 hours thanks to our TA Evan Villafranca, lab director Dr. Danyel Cavazos, and the intuitive Infleqtion miniMOT device.”
Related Products
Explore two-cell systems for high atom flux, long trap lifetimes, or BEC production.
Self-contained, tabletop UHV system with separate source and science cells for high atom flux, long trap lifetimes, and flexible cold atom experiments.
Self-contained, tabletop UHV system with a 2D+ MOT source cell, a science cell for long trap lifetimes, and an integrated atom chip for BEC production.
Rubidium and Cesium atoms.
The miniMOT has been designed to work with Rb and Cs atoms only. Future product releases may be designed around other atom species.
Infleqtion recommends using our standard miniMOT magnet assembly.
The standard miniMOT V2 coils have a diameter of 58.6mm.
Yes. Custom UHV glass cells can be offered depending on the final specifications. Contact us.
The spacing between the 2 coils is 58.9mm.
We do not provide details on the number of windings of our MOT Coil product.
H-Coating
K-Coating
Please consult the miniMOT V2 User Manual.
We do not provide details on the materials and construction of our MOT Coil product.
Infleqtion offers users a pre-aligned optics kit, miniMOT Package, to help users guide laser light into the glass cell.
A certificate of conformance is provided with the unit. The operating drive current at which fluorescence was observed is listed in this document. Please consult the Installation Guide in the product user manual for additional technical support.
The miniMOT Package requires a FC/APC fiber input.
Please consult the product user manual for additional technical support.
If the product is used under normal operating conditions, e.g., specified drive current values, the miniMOT should last several years.
The atom dispensers are not replaceable. A new unit will be required if they are past their useful lifetime, which is typically several years. Please consult the product user manual for additional technical support.
Please consult the user manual for guidance on the steps that should be performed.
The original miniMOT is obsolete and is no longer supported by Infleqtion. For more information, please contact us.
Future versions of the product will be released with these features enabled. For more information, contact us.
If you purchased the product directly from Infleqtion, please contact us. If you purchased the product from a distributor, please contact your sales representative.
No. Due to the temperatures required for bake out (>300 C) the miniMOT unit would be damaged.
No. The dispensers are located in the optimal position for MOT creation.
Field service is not provided at this time. If there is a problem with the unit please consult the Troubleshooting Guide in the user manual for additional technical support.
View the Terms of Sale. This document also contains information on the product warranty.
News & Insights
Follow our progress from research to real-world deployment.
View All NewsFind a distributor or request a quote to get started.